Results 1 to 3 of 3
Injector hold down clamp
This is a discussion on Injector hold down clamp within the Performance and Troubleshooting forums, part of the Sprinter Van Tech Talk category; 2005 sprinter.. Injector cylinder 1 and 2... # 2 hold down clamp bolt = 6mm x 1.0 threads in the ...
LinkBack URL
About LinkBacks-
04-05-2011, 04:15 PM #1Junior Member
- Join Date
- Apr 2011
- Location
- Sarasota, FL
- Posts
- 2
Injector hold down clamp
2005 sprinter.. Injector cylinder 1 and 2... # 2 hold down clamp bolt = 6mm x 1.0 threads in the cylinder head will not reach tourqe specs ... any ideas.. besides pulling the head. injector # 1 held torque ok spec was 62 inch lbs + 90 degrees per OEM.
-
04-05-2011, 05:37 PM #2Junior Member
- Join Date
- Feb 2011
- Location
- Amerika
- Posts
- 55
Is it stripped? Can you put a heli coil in it?
2005 Dodge Sprinter 140WB 2500 T1N
2010 Mercedes Sprinter 170WB 2500 NCV3
Bob
-
04-06-2011, 01:37 AM #3Junior Member
- Join Date
- Apr 2011
- Location
- Sarasota, FL
- Posts
- 2
.......... That is 1 option .. i will attempt ...
Originally Posted by flman
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks